DIY camper build episode 8 showing fiberglassing and epoxy sealing on a homemade camper

Homemade Camper Build Episode 8 | Fiberglassing the Camper & Finishing the Bottom

Welcome to Episode 8 of our homemade camper build! In this episode, we make major progress protecting and finishing our DIY camper as we fiberglass the seams and edges and complete the bottom of our camper body.

We’re building a custom squaredrop camper from scratch, and properly sealing the plywood is an important part of protecting the camper from moisture and the elements.

DIY Camper Build Fiberglassing: Seams and Edges

We start by sanding all the areas where fiberglass will be applied. Once the surfaces are prepared, we fiberglass the seams and edges throughout the camper body. This helps reinforce the joints and create a protective seal.

After completing the fiberglass work, we carefully flip the entire camper body over so we can begin working on the bottom.

Sealing the Bottom of Our Homemade Camper

With the camper body flipped over, we countersink the screw heads and fill them with wood putty. We then use a router to trim the edges and prepare the bottom for sealing.

Next, we apply epoxy and fiberglass the seams on the bottom of the camper. These steps help create a strong, sealed surface designed to protect the plywood from moisture.

What You’ll See in Episode 8

  • Sanding areas in preparation for fiberglassing
  • Fiberglassing camper seams and edges
  • Flipping the camper body over
  • Countersinking screw heads on the bottom
  • Filling screw holes with wood putty
  • Trimming the bottom edges with a router
  • Applying epoxy to the camper bottom seams
  • Fiberglassing the bottom seams
  • Continuing our homemade camper build from scratch

This DIY camper build series documents our complete journey of building a homemade squaredrop camper on a Harbor Freight 5×10 trailer. Follow along as we work through framing, sheathing, insulation, fiberglassing, electrical installation, interior finishing, and all the custom details that go into building our own camper.

If you’re interested in DIY camper builds, fiberglass camper construction, epoxy sealing, homemade campers, squaredrop campers, and building a camper from scratch, subscribe to Adventures in the South and follow our progress.

Watch the complete DIY Camper Build series:
DIY Camper Build on Harbor Freight Trailer Playlist

See the products used in our camper build:
All of the Products Used to Build Our Camper

Shop Our Favorite Camping, Fishing & Outdoor Gear on Amazon

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *